WORK MEISTER S1R Wheels, Deep Lip, Set of 4, 19x10J/11.5J 5x114.3 -15/-34

Used set of four WORK MEISTER S1R wheels in a deep-lip design, front lip 130mm and rear lip 170mm. Front wheels are 19x10J, 5x114.3, -15 offset; rear wheels are 19x11.5J, 5x114.3, -34 offset. Hub bore is 73mm with a 60-degree taper seat, 12mm. The seller lists this as suitable for large Japanese sedans such as Crown, Aristo, Supra, Cima, Cedric/Gloria, President and similar big-body cars. Seller notes: all four wheels show repair marks on the front rim face, with two of the four having slight runout/wobble that they consider acceptable once balanced with tires. Two wheels have minor staining on the disc face, one wheel has paint peeling on the disc face, and all four show paint wear around the hub and lug nut holes. Center caps are not included. Seller states these imperfections are not very noticeable once mounted on a vehicle.

Used wheels with cosmetic wear: repair marks on the front rim faces, minor staining/paint peeling on some disc faces, and paint wear around the hubs and nut holes on all four; two wheels have slight runout the seller considers manageable with tire balancing. Center caps are missing.

Shipping: Domestic shipping to our Osaka consolidation point is confirmed at 5,000 JPY via the seller's designated carrier. The seller notes an additional relay fee applies for delivery to Okinawa or remote islands, though that does not affect this consolidated shipment.