OZ Racing CUP 15x7J+37 Wheels, Set of 4, Deep Dish 5-Spoke, PCD100/4H, Kei Car Fitment w/ 165/45-15 Tires, M14

This is a consignment set of four OZ Racing CUP wheels, 15 inch, 7J offset +37, 5-spoke deep-dish design, PCD100/4H, sized for kei cars and designed to fit M14 lug studs. The seller says the wheels were removed from a customer's kei car simply because the owner did not like the deep-dish look, not due to any damage. No major leaks were found, and runout/balance were not measured but the seller reports no odd vibration while driving (note the donor car had significant suspension modifications, so ride feel may not be representative). These are genuine 'cup style' wheels with an aggressive poke; a 7J width on a kei car will stick out noticeably, and camber adjustment or fender work is generally required to run them, along with lowered suspension. Center bore is 70mm with a 57mm hub ring installed, and caliper clearance is about 28mm or less depending on spoke bend. Mounted tires are 165/45-15: a pair of ATR-K tires believed made around February 2020 with 6.7-6.9mm tread remaining, and a pair of Nankang NS-2 tires believed made around January 2020 with 5.25-6.2mm tread remaining (roughly 60-70% life). Buyers are urged to visually confirm tread depth themselves.

Seller lists overall condition as 'slight scratches and dirt,' noting one larger curb rash on a spoke plus additional minor curb rash and general surface dulling on the wheel barrels. Wheel runout/balance was not verified by measurement, only by driving feel.

Shipping: Ships from Kyoto Prefecture; the seller typically uses Yamato but may switch to Sagawa or Seino depending on size. Seino shipments add a 500 yen handling surcharge, and Sagawa shipments can add 500 yen fees for packaging or missing phone number; remote areas like Okinawa or outlying islands incur extra relay charges. Final shipping cost is determined at time of shipment rather than fixed in the listing.