FD3S RX-7 4th Gen AT Sunroof Assembly - Tested/Working

This is a sunroof assembly removed from a Mazda FD3S RX-7, 4th generation (1997 model year, Touring X grade with AT and factory sunroof), taken from a donor car with about 99,000km on the odometer. The seller states the donor car was not flood-damaged or wrecked. The unit was removed roughly 19 years ago and has been stored in a warehouse since. The sunroof control switch is NOT included and is listed separately. Before listing, the seller cleaned and regreased the open/close rails (now moving smoothly) and disassembled and cleaned the motor, regreasing it and replacing the ceramic capacitor with a new one; with the motor removed the sunroof can be opened and closed by hand. There is some visible rust on the assembly. One bolt/nut-type part is missing. One plastic (resin) part was missing and has been replaced with a 3D-scanned, 3D-printed reproduction made of ASA plastic. A working demonstration video is linked in the original listing.

Seller notes visible rust in some areas, one missing bolt/nut hardware piece, and one originally-missing resin part replaced with a 3D-printed ASA reproduction. Listing condition is marked as having some scratches/dirt (yaya kizu ya yogore ari).

Shipping: Ships via Yamato Transport (Takkyubin); domestic shipping to our Osaka consolidation point is confirmed at 5,060 JPY. Shipped from Aomori Prefecture.