Enkei Bigend Barrel 15x8J +35 4x100 Wheel Set of 4 - Roadster/bB/Vitz/March/Fit/Demio/Note/Cube

This listing is for a set of four genuine Enkei Bigend Barrel wheels, an old-school 10-spoke design known for its deep, dished reverse lip. These are Japanese-made 2-piece wheels in the rare 15-inch, 8J width compact car size, with a +35mm offset intended for a flush tuner fit. Depending on the vehicle, fender rolling, lowered suspension, camber adjustment, or over-fenders may be needed to clear properly. Finished in black with a polished lip, the wheels use a roughly 72mm hub bore and 100mm/4-hole bolt pattern. Valve stems are included. The seller notes no cracks or air leaks. One wheel has had its rim edge machined/repaired by a shop, leaving that edge slightly thinner than stock, and a second wheel has had a rim impact area corrected. Minor scuffs are otherwise present, but overall condition is described as comparatively good, with the polished sections free of serious corrosion. Buyers are advised to check photos closely and verify fitment themselves, as the seller does not confirm specific vehicle compatibility.

Seller describes overall condition as good with some scratches and dirt (やや傷や汚れあり); no cracks or air leaks, but one wheel has a machine-repaired rim edge (slightly thinner) and another has a corrected rim impact spot.

Shipping: Domestic shipping to our Osaka consolidation point is confirmed at 5,900 JPY via Yamato Transport. The seller notes an additional surcharge applies for delivery to Hokkaido, Okinawa, and other remote islands.