Custom Coilover Conversion Kit for Toyota Celica XX AA63/GX61/TA63 & Related Chassis (Vintage)

This is a home-fabricated coilover conversion kit made from modified strut cases, cleared out from storage after roughly 30 years. The seller originally built it for a Celica XX but switched to Bilstein dampers, so this kit was never used. The strut cases were shortened (exact cut length unknown) and a TEIN coilover adapter was welded on. After the modification it was stored unused for a long time. Spring inner diameter is 65mm, and the ring nut is 48mm with a 1.0mm thread pitch. The seller believes it was originally sized to fit one of the TRD damper part numbers, and when test-fitting for this listing found that a TA001 was too long and an AE941 too short. The seller also believes it should fit other Toyota RWD strut-based chassis of similar class to the AE86, including AA63 and GX61, but is not fully certain due to the age of the parts and recommends buyers check the photos and confirm fitment themselves. The base struts are not from an accident vehicle, so there is no spindle bending.

Seller notes scratches and dirt consistent with long-term storage (about 30 years). The struts are not from a wrecked vehicle, so there is no spindle bending, and the welded modification was never actually used.

Shipping: The listing references a shipping size code but does not name a specific carrier or state whether combined shipping or pickup is available.