AE86 4A-G 4.5AG 83mm Piston & Block Set, Used

This is a used 4A-G 16-valve engine block with pistons, pulled from an AE86. The pistons are CA-piston-based units machined to 4.5AG spec with an 83mm bore, and the block has been bored and honed to match. Piston pin diameter is 20mm, so it will work with late-92-and-newer connecting rods and crankshaft. The lot includes the block, 4 pistons, 4 pins, and 4 pin clips (8 small parts total); the crankshaft and connecting rods are not included since they were reused in the seller's replacement engine. The seller states there is no blow-by and the piston rings are still serviceable, the block has no history of overheating, and the cylinders are still usable. The car this came from was driven on the street only, not tracked or drifted. In a follow-up note the seller adds the engine had about 30,000 km on it since assembly, ran a Tomei Poncam and single throttle body with an 8200rpm redline, but was never actually revved to redline.

Seller notes general wear/dirt consistent with a used part, but states no blow-by, no overheating history, and that pistons, rings, and cylinders remain usable.

Shipping: Ships from Fukuoka Prefecture; the seller did not clearly specify a shipping carrier or method in the listing text.